| Packet Forwarding |
| 802.1D-1999 Ethernet Bridging; 802.11-.802.3 Bridging ; 802.1Q VLAN Tagging & Trunking; Proxy ARP; IP packet steering-redirection |
| Wireless Networking |
| Wireless LAN: |
Supports 32 WLANs; Multi-ESS/BSSID traffic segmentation; VLAN to ESSID mapping; Power Save Protocol Polling; Pre-emptive Roaming; Congestion control with bandwidth allocation |
| Access Port Radios: |
Supports 1-48 Access Ports; Automatic Access Port Adoption with ACLs; Access Port Load Balancing; Frequency Hopping Access Point-to-Access Port Conversion; Direct Sequence Access Point-to-Access Port Conversion |
| Supported Access Ports and Access Points: |
Access Ports — AP100 (802.11b); AP200 (802.11a/b); AP300 (802.11a/b/g ready) Access Points — AP3021; AP4121 |
| Radio & Frequency Management: |
Automatic Channel Select (ACS); Transmit Power Control (TPC); Country Code based RF Configuration; 802.11b - 3 Non-overlapping channels; 802.11a—11 Non-overlapping channels; 802.11g—3 Non-overlapping channels (ready) |
| Network Security |
| Packet Filtering: |
L2/3/4 Stateful Packet Analysis; Network Address Translation (NAT) |
| Authentication Mechanisms: |
Access Control Lists (ACLS); Pre-Shared Keys (PSK); 802.1x/EAP—Transport Layer Security (TLS), Tunneled Transport Layer Security (TTLS), Protected EAP (PEAP); Kerberos |
| Transport Encryption: |
WEP 40/128 (RC4), KeyGuard, WPA—TKIP, AES |
| Key Exchange and Management: |
Extensible Authentication Protocol (EAP) Kerberos |
| Optimized Wireless QoS |
| Per Device Weighted Fair Queuing: |
8 queues per device; Bandwidth management controls; Power Save Protocol (PSP) integration |
| RF Priority: |
802.11 traffic prioiritization and precedence |
| Classification & Marking: |
Layer 1-4 Packet Classification; 802.1p VLAN Priority; DiffServ/TOS |
| System Resiliency & Redundancy |
| Redundant Warm-Standby Switch ; Access Port Load Balancing; Hardware based watchdog timer |
| Management |
| Command Line Interface (Serial, Telnet); Secure Web Based GUI (SSL); Telnet Server; SNMP v1/v2; SNMP Traps—40+ user configurable options; Syslog; TFTP Client; Simple Network Time Protocol (SNTP); Text-Based Switch Configuration Files; DHCP (Client/Server/Relay, Switch Auto-Configuration with DHCP options); Authentication (Radius Client, Kerberos Authentication Server); MIBs (MIB-II, Etherstats, Wireless Switch specific monitoring and configuration) |
| Physical Characteristics |
| Form Factor: |
Standard 1RU |
| Dimensions: |
1.73 in. H x 16.89 in. W x 15.93 in. D
43.9 mm H x 429 mm W x 404.6 mm D |
| Weight: |
13.75 lbs./6.25 kg |
| Physical Interfaces: |
RS232 serial console port; 10/100/1000 Ethernet ports |
| MTBF: |
>75,000 Hours |
| Power Requirements |
| AC Input Voltage: |
100-240 VAC |
| Max AC Input Current: |
6A@115 VAC, 3A@230 VAC |
| Max Power Consumption: |
100-240 VAC, 50/60 Hz, 3A, 240 VAC, 50/60 Hz, 1.5A |
| Input Frequency: |
47 Hz to 63 Hz |
| User Environment |
| Operating Temperature: |
50°F to 95°F/10°C to 35°C |
| Storage Temperature: |
40°F to 149°F/-40°C to 65°C |
| Operating Humidity: |
5%-85% (w/o condensation) |
| Storage Humidity: |
5% - 95% (w/o condensation) |
| Operating Altitude: |
50 ft. to 10,000 ft./16 m to 3,048 m |
| Storage Altitude: |
50 ft. to 35,000 ft./16 m to 10,600 m |
| Regulatory |
| Safety Certifications: |
FCC (Art.15, part B), Industry Canada, CE, VCCI, C-Tick, BSMI |
| EMI Compliance: |
UL 1950, cUL (Canada), VDE GS, DENAN (Japan), CB Cert |
| Part Numbers |
WS-5100-R140-06-WW
WS-5100-R140-12-WW
WS-5100-R140-18-WW
WS-5100-R140-24-WW
WS-5100-R140-30-WW
WS-5100-R140-RS-WW
WS-5100-UC-WW |
6 Port WS5100 Wireless Switch
12 Port WS5100 Wireless Switch (Z-Pak)
18 Port WS5100 Wireless Switch (Z-Pak)
24 Port WS5100 Wireless Switch (Z-Pak)
30 Port WS5100 Wireless Switch (Z-Pak)
Redundant WS5100 Wireless Switch 6 Port Upgrade |
